If your Mercedes Sprinter or Vito displays START ERROR then normally taking this to the dealers can be very expensive.

A new WSP (immo box) and possibly and new ECU would be required and would need coding.

We can repair this start error and get your vehicle working again.

As we are repairing your original components you will not need to code the components back to the vehicle.

All you vehicle data will remain the same like the Vin, mileage and other factors.

You will need to send in :

Whilst you are sending in your components you might consider having your vehicle remapped and get a spare key

It is important that you remove the key before attempting to remove any components

Once removed do not try and start your vehicle or insert the key !

It is important  that you have 2 +12V supplies to yor WSP please check as in the diagram below before sending. Contact us if you do not have the supplied there.

Pin 3 is battery +12V , Red/Yellow Wire

Pin 7 is ignition +12V, Black /Yellow Wire

Here are images of what we need :

ECU is mounted behind/underneath the glove box

WSP is attatched to the rear of the instrument cluster

Your ECU , WSP and Key will be sent back ready to start your vehicle.